6113a_dc_power_supply
HP 6113A Precision Power Supply
| First Catalog | 1960s |
|---|---|
| Last Catalog | 1980s |
| Series | STB |
| Outputs | 1 |
| Ranges | 1 |
| Voltage | 0-10 V |
| Current | 0-2 A |
| Rear Terminals | Yes |
| Remote Programming | Analog |
| Remote Sensing | Yes |
| Multiple Operation | Series, Parallel |
| Crowbar | Optional |
This instrument is a precision voltage source from the STB series. Like the other models in this series, it achieves high stability by utilizing an oven-stabilized zener reference. For voltage setting, it uses four digit thumbwheels connected to an array of precision resistors and a single potentiometer for trimming. For current setting, it uses a single turn potentiometer.
This power supply has an unusual combination of precision and stability fit for a calibrator and a high 2 amp output current, making it suitable both for precision applications and general bench use.
More information about this unit can be found on Kerry Wong's excellent blog.
| Output Impedance | |
|---|---|
| DC - 100 kHz | < 2 mΩ |
| 100 Hz - 1 kHz | < 20 mΩ |
| 1 kHz - 100 kHz | < 500 mΩ |
| 100 kHz - 1 MHz | < 3 Ω |
| Remote Programming Coefficients | |
|---|---|
| Voltage | 1 kΩ/V |
| Voltage Accuracy | 0.1% + 1 mV |
| Current Limit | ~500 Ω/A |
| Precision Specifications | |
|---|---|
| Programming Resolution | 100 µV |
| Programming Accuracy | 0.1% + 10 µV |
| Load Regulation Front | < 0.001% + 1.1 mV |
| Load Regulation Rear | < 0.001% + 100 µV |
| Line Regulation | < 0.01% |
| Ripple and Noise | < 100 µV pk-pk, < 40 µV rms |
| Temperature Coefficient | (< 0.001% + 10 µV)/ºC |
| Stability 8 Hours | < 0.01% + 100 µV |
| Stability 1 Month | < 0.012% + 120 µV |
6113a_dc_power_supply.txt · Last modified: 2020/06/26 21:50 by mcguire