User Tools

Site Tools


6113a_dc_power_supply

HP 6113A Precision Power Supply

First Catalog 1960s
Last Catalog 1980s
Series STB
Outputs 1
Ranges 1
Voltage 0-10 V
Current 0-2 A
Rear Terminals Yes
Remote Programming Analog
Remote Sensing Yes
Multiple Operation Series, Parallel
Crowbar Optional

This instrument is a precision voltage source from the STB series. Like the other models in this series, it achieves high stability by utilizing an oven-stabilized zener reference. For voltage setting, it uses four digit thumbwheels connected to an array of precision resistors and a single potentiometer for trimming. For current setting, it uses a single turn potentiometer.

This power supply has an unusual combination of precision and stability fit for a calibrator and a high 2 amp output current, making it suitable both for precision applications and general bench use.

More information about this unit can be found on Kerry Wong's excellent blog.

Output Impedance
DC - 100 kHz < 2 mΩ
100 Hz - 1 kHz < 20 mΩ
1 kHz - 100 kHz < 500 mΩ
100 kHz - 1 MHz < 3 Ω
Remote Programming Coefficients
Voltage 1 kΩ/V
Voltage Accuracy 0.1% + 1 mV
Current Limit ~500 Ω/A
Precision Specifications
Programming Resolution 100 µV
Programming Accuracy 0.1% + 10 µV
Load Regulation Front < 0.001% + 1.1 mV
Load Regulation Rear < 0.001% + 100 µV
Line Regulation < 0.01%
Ripple and Noise < 100 µV pk-pk, < 40 µV rms
Temperature Coefficient (< 0.001% + 10 µV)/ºC
Stability 8 Hours < 0.01% + 100 µV
Stability 1 Month < 0.012% + 120 µV

6113a_dc_power_supply.txt · Last modified: 2020/06/26 21:50 by mcguire

Page Tools